RevPi Gateways

KUNBUS RevPi Gateways integrate Revolution Pi systems into a fieldbus or industrial Ethernet network. These gateways are connected to the base module RevPi Core via the overhead PiBridge connector, allowing up to two gateway modules to be used per system. The cyclic data exchange between the gateway and the central process image of the RevPi Core 3 happens every 5ms, regardless of the bus protocol and system configuration. Due to the required processing power, the exclusive use of gateways in conjunction with the Quad-Core-equipped RevPi Core 3 is recommended. KUNBUS RevPi Gateways are offered for the PROFINET IRT, Ethernet/IP, EtherCAT, or PROFIBUS protocols.

Resultat: 4
Välj Bild Artikelnummer
 Tillverk:
Beskrivning Datablad Tillgänglighet Prissättning: (SEK) Filtrera resultaten i tabellen efter enhetspris baserat på din kvantitet.
Antal RoHS ECAD-modell Produkt
Datahastighet
Antal portar
Maximal matningsspänning
Minsta drifttemperatur
Maximal drifttemperatur
Förpackning
KUNBUS Gateways RevPi Gate EtherNet/IP - Adapter
Datablad
7På lager
Min.: 1
Multipla: 1

EtherNet/IP 100 Mb/s 2 Port 24 VDC 0 C + 60 C Blister Pack
KUNBUS Gateways RevPi Gate EtherCAT - SubDevice
Datablad
5På lager
Min.: 1
Multipla: 1

EtherCAT 100 Mb/s 2 Port 26 VDC 0 C + 60 C Blister Pack
KUNBUS Gateways RevPi PROFINET IRT - Device
Datablad
1På lager
Min.: 1
Multipla: 1

PROFINET IRT 100 Mb/s 2 Port 24 VDC 0 C + 60 C Blister Pack
KUNBUS Gateways RevPi Gate PROFIBUS - Slave
Datablad
Ledtid för icke lagerfört 4 Veckor
Min.: 1
Multipla: 1

PROFIBUS 100 Mb/s 2 Port 25 VDC 0 C + 60 C Blister Pack