SparkFun-tillbehör Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long.

SparkFun-tillbehör This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" ( 150mm) cable has been terminated with a JST-PH connector.The connector mates the JST socket on the micro:bit perfectly allowing you to easily make your p

SparkFun-tillbehör If you want to get some sound out of your project but have a tight space budget this is a good way to do it. This 0.5W 8Ohm speaker is only 40mm in diameter and just over 4mm thick the same kind you might find in one of those "talking greeting car

SparkFun-tillbehör USB-C is quickly becoming more and more prominent in the maker community because let s be honest who likes trying three times to insert USB into a port? This is a 16-pin female USB Type C connector that is commonly found in smart phones laptop

Utvecklingsverktyg för WiFi - 802.11 The SparkFun Arduino UNO R4 WiFi Qwiic Kit is a great way to start with Arduino and the Qwiic-connect system. This kit includes everything you need to build a WiFi-enabled project including an Arduino UNO R4 board an assortment of Qwiic-enabled sen

SparkFun-tillbehör These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage and/or high current devices.This relay's coil is rated up to 12V with a minimum switching voltage of 5V. The contacts are rated up to 5A (@250VA

SparkFun-tillbehör Transistor NPN (2N3904)

SparkFun-tillbehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard yellow LED. The lens is 3mm in diameter and it is diffused.Features:2.0-2.4VDC forward dropMax current

SparkFun-tillbehör Atmel's itty-bitty ATtiny85 8-Bit Processor. 8K of program space 6 I/O lines and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit.Documents:Product CardArduino Board Definitions

SparkFun-tillbehör USB Type 'Mini-B' Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players media/disk readers USB hubs pretty much anything small and USB.Documents: Datasheet

SparkFun-tillbehör There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SparkFun-tillbehör This is a simple 2x3 female PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.