Alla resultat (1 921)

SparkFun-tillbehör The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out micro:bits for p

SparkFun-tillbehör These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as

SparkFun-tillbehör These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. We really like the quality and sturdiness of these crimp pliers. These pliers are capable of crimping very small 0.25 - 1.5mm crimp pins and

SparkFun-tillbehör This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your

SparkFun-tillbehör This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f

SparkFun-tillbehör PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e

SparkFun-tillbehör These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals the two tha

SparkFun-tillbehör There is something incredibly satisfying about a clean heavy-duty metal interface. This 16mm latching pushbutton with wires is designed to provide the professional rugged feel for your custom panels and interactive projects. Instead of a basic plas

SparkFun-tillbehör DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet

SparkFun-tillbehör Jumper - 2 Pin

SparkFun-tillbehör These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f

SparkFun-tillbehör It's like an Xacto knife only better. We use these extensively when working with PCBs. These small knives work well for cutting traces scraping ground pours and guiding hair-like wires into their proper place. Excel knife comes with aluminum handl