Alla resultat (1 945)

SparkFun-tillbehör Resistor 330 Ohm 1/4 Watt PTH - 20 pk

SparkFun-tillbehör This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the micro:bit on and o

SparkFun-tillbehör Here is a powerful low-cost reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60 This is a tough little servo with a standard 3 pin power and control cable

SparkFun-tillbehör Line Follower Array Follower Array

SparkFun-tillbehör Barrel Jack to 2-pin JST

SparkFun-tillbehör These are nice cross-locking curved tweezers unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool t

SparkFun-tillbehör This is a breakout board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate voltage level translators can be the key to making different parts play nice.The PCA9

SparkFun-tillbehör Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl

Programmerbara logiska IC-utvecklingsverktyg If you are not needing a lot of power to start your FPGA adventure or are looking for a more economical option the Alchitry Cu FPGA Development Board might be the perfect option for you! The Alchitry Cu is a "lighter" FPGA version than the Alchitry

SparkFun-tillbehör Big Red Box Enclosure

Kapslingar för enkortsdatorer Why use a heatsink and a case when you can use a heatsink case?! This black anodized aluminum case for the Raspberry Pi 4 will give you 10-15 C of passive cooling under a full CPU load. This case is great for situations where you want completely s

SparkFun-tillbehör The AH1815 is an integrated Hall-Effect non-latched sensor. That s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be