Resultat: 315
Välj Bild Artikelnummer Tillverk: Beskrivning Datablad Tillgänglighet Prissättning: (SEK) Filtrera resultaten i tabellen efter enhetspris baserat på din kvantitet. Antal RoHS ECAD-modell Produkttyp Produkt Frekvens Frekvensräckvidd Märkspänning Bildstorlek Termineringsstil Paket/låda Minsta drifttemperatur Maximal drifttemperatur
Marki Microwave Signalkonditionering The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
1Förväntad 2026-10-09
Min.: 1
Multipla: 1

Signal Conditioning Baluns 300 kHz to 26.5 GHz 300 kHz to 26.5 GHz 50 Ohms Connector
Marki Microwave Signalkonditionering The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth. Ledtid för icke lagerfört 12 Veckor
Min.: 1
Multipla: 1

Signal Conditioning Baluns 300 kHz to 67 GHz 300 kHz to 67 GHz
Marki Microwave Signalkonditionering A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
6Förväntad 2026-07-31
Min.: 1
Multipla: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms Connector
Marki Microwave Signalkonditionering The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
2Förväntad 2026-09-29
Min.: 1
Multipla: 1

Signal Conditioning Bias Tees 4 kHz to 40 GHz 30 VDC 50 Ohms Connector
Marki Microwave Signalkonditionering The EBAL-0040 is an ultra-broadband 1:2 balun (unbalanced to balanced transformer), hand-tuned for optimal amplitude and phase balance.
1Förväntad 2026-09-11
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
2Förväntad 2026-07-21
Min.: 1
Multipla: 1

Signal Conditioning 0 Hz to 30 GHz 0 Hz to 30 GHz Connector - 55 C + 100 C
Marki Microwave Signalkonditionering The MM2-0530H is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530H is available as a wire bondable chip or connectorized SMA package.
3Förväntad 2026-07-17
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
3Förväntad 2026-09-11
Min.: 1
Multipla: 1

Signal Conditioning Mixers 10 MHz to 12 GHz, 1 MHz to 4 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Signalkonditionering The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
1Förväntad 2026-07-21
Min.: 1
Multipla: 1

Signal Conditioning Mixers 10 MHz to 20 GHz 10 MHz to 20 GHz Connector - 55 C + 100 C
Marki Microwave Signalkonditionering A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
3Förväntad 2026-10-30
Min.: 1
Multipla: 1

Signal Conditioning Baluns 200 kHz to 3 GHz 200 kHz to 3 GHz 50 Ohms Connector
Marki Microwave Signalkonditionering A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
10På beställningen
Min.: 1
Multipla: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms
Marki Microwave Signalkonditionering The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
1Förväntad 2026-11-06
Min.: 1
Multipla: 1

Signal Conditioning Baluns 300 kHz to 36 GHz 300 kHz to 36 GHz
Marki Microwave Signalkonditionering The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
8Förväntad 2026-12-11
Min.: 1
Multipla: 1

Signal Conditioning Bias Tees 50 Ohms Connector
Marki Microwave Signalkonditionering This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
1Förväntad 2026-10-23
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
3På beställningen
Min.: 1
Multipla: 1

Signal Conditioning 200 kHz to 3 GHz 200 kHz to 3 GHz Connector
Marki Microwave Signalkonditionering The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
1Förväntad 2026-08-21
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
1Förväntad 2026-10-23
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering MM1-1467H is a GaAs MMIC double balanced mixer with a broad IF bandwidth and low conversion loss. This mixer is ideal for applications which require broad IF bandwidths with operation at mmWave frequencies.
1Förväntad 2026-07-23
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
1Förväntad 2026-12-15
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
1Förväntad 2026-10-02
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
1Förväntad 2026-11-13
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz. Ledtid för icke lagerfört 12 Veckor
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems. Ledtid för icke lagerfört 12 Veckor
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz. Ledtid för icke lagerfört 12 Veckor
Min.: 1
Multipla: 1

Signal Conditioning
Marki Microwave Signalkonditionering A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors. Ledtid för icke lagerfört 12 Veckor
Min.: 1
Multipla: 1

Signal Conditioning