SparkFun Electronics Industriell automatisering

Utbildningssatser för robotteknik This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor

Utbildningssatser för robotteknik This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.Note: Servos are not included. The sub-micro servo size

RF-sladdmonteringar This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8in.) long with RG174 housing. The SMA connectors at each end are small enough for most consumer GPS cellular and other RF applications and they use a threa

USB/IEEE-1394-kablar You've got the wrong USB cable. It doesn't matter which one you have it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1 Multi

RF-sladdmonteringar This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. Able to withstand harsh environment

RF-sladdmonteringar This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 1M (39.3in.) long with RG174 housing. The SMA connectors at each end are small enough for most consumer GPS cellular and other RF applications and they use a thread

USB/IEEE-1394-kablar This is a USB-C to USB-C power charging cable. It comes with a flexible tangle free silicone coating. Coming in at 3m (9.84') giving you plenty of length to work on your project without needing to be right next to the power source.This cable support

Magnetledning Magnetledning Kit

Utbildningssatser för robotteknik This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds balloon and some other parts.Features:12V motor12W operation1/4" ba

Styrspakar This is a "deluxe" joystick knob very similar to the thumb pads on PlayStation controllers. We specifically carry this knob to pair with our 16mm Deluxe Thumb Joystick.

DC-motorer These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 50:1 and operate up to 12 volts and have a stall torque of 20 oz-in. and a max speed of 460 RPM. Each micro gearmotor sports a 3mm D-shaft.Note: The m

Utbildningssatser för robotteknik This is a 12 wire slip ring a remarkably simple electromechanical assembly that allows electronic signals to be passed through its rotating innards. Commonly you'd find slip rings in wind turbines radar antennae or anything else that requires con