A201 FlexiForce™ Piezoresistive Force Sensors

Tekscan A201 FlexiForce™ Piezoresistive Force Sensors are thin, flexible sensors available off-the-shelf in various lengths for easy proof of concept. In multiple applications, these ultra-thin sensors are ideal for non-intrusive force and pressure measurement. The A201 sensors measure up to 4,448N (1,000lbs.). To measure higher forces, apply a lower drive voltage (-0.5V, -0.25V, etc.) and reduce the resistance of the feedback resistor (1kΩ minimum). For lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.

Resultat: 6
Välj Bild Artikelnummer
 Tillverk:
Beskrivning Datablad Tillgänglighet Prissättning: (SEK) Filtrera resultaten i tabellen efter enhetspris baserat på din kvantitet.
Antal RoHS ECAD-modell Sensortyp
Manövreringskraft
Noggrannhet
Utgångstyp
Monteringsstil
Tekscan Kraftsensorer och lastceller 100 lb force specification; sensing area diameter of 0.375 in. (9.533 mm); standard length of 7.75 in.
Datablad
748På lager
Min.: 1
Multipla: 1

Force Sensor 445 N 3 % Voltage Solder Tab (Pin)
Tekscan Kraftsensorer och lastceller 25 lb force specification; sensing area diameter of 0.375 in. (9.533 mm); standard length of 7.75 in.
Datablad
481På lager
Min.: 1
Multipla: 1

Force Sensor 111 N 3 % Voltage Solder Tab (Pin)
Tekscan Kraftsensorer och lastceller 1 lb force specification; sensing area diameter of 0.375 in. (9.533 mm); trimmed to 4 in.
Datablad
19På lager
Min.: 1
Multipla: 1

Force Sensor 44 N 3 % Voltage Solder Tab (Pin)
Tekscan Kraftsensorer och lastceller 100 lb force specification; sensing area diameter of 0.375 in. (9.533 mm); trimmed to 4 in.
Datablad
49På lager
Min.: 1
Multipla: 1

Force Sensor 445 N 3 % Voltage Solder Tab (Pin)
Tekscan Kraftsensorer och lastceller 1 lb force specification; sensing area diameter of 0.375 in. (9.533 mm); standard length of 7.75 in.
Datablad
17På lager
200På beställningen
Min.: 1
Multipla: 1

Force Sensor 4.4 N 3 % Voltage Solder Tab (Pin)
Tekscan Kraftsensorer och lastceller 25 lb force specification; sensing area diameter of 0.375 in. (9.533 mm); trimmed to 4 in.
Datablad
25Förväntad 2026-07-13
Min.: 1
Multipla: 1

Force Sensor 111 N 3 % Voltage Solder Tab (Pin)