AL1666S-13

Diodes Incorporated
621-AL1666S-13
AL1666S-13

Tillverk:

Beskrivning:
LED-belysningsdrivkretsar LED Offline Driver

ECAD-modell:
Ladda ned den kostnadsfria Libary Loader för att omvandla denna fil för ditt ECAD-verktyg. Läs mer om ECAD-modellen.

På lager: 20 020

Lager:
20 020 Kan skickas omedelbart
Fabrikens ledtid:
12 Veckor Uppskattad tillverkningstid i fabriken för kvantiteter som är större än vad som visas.
Minst: 1   Flera: 1
Enhetspris:
-,-- kr
Ext. pris:
-,-- kr
Est. Pris:

Prissättning (SEK)

Antal Enhetspris
Ext. pris
4,87 kr 4,87 kr
3,42 kr 34,20 kr
3,05 kr 76,25 kr
2,66 kr 266,00 kr
2,47 kr 617,50 kr
2,35 kr 1.175,00 kr
2,26 kr 2.260,00 kr
Komplett Papprulle (beställ i multiplar av 4000)
1,98 kr 7.920,00 kr
1,96 kr 15.680,00 kr

Produktattribut Attributvärde Välj attribut
Diodes Incorporated
Produktkategori: LED-belysningsdrivkretsar
RoHS-direktivet:  
1 Output
Boost, Buck, Flyback
SOIC-8
29.5 V
8.5 V
150 kHz
400 mV
- 40 C
+ 105 C
PWM Dimming
Reel
Cut Tape
Märke: Diodes Incorporated
Avbländning: With Dimming
Ingångsspänning: 8.5 V to 29.5 V
Monteringsstil: SMD/SMT
Antal kanaler: 1 Channel
Produkttyp: LED Lighting Drivers
Fabriksförpackningskvantitet: 4000
Underkategori: Driver ICs
Strömstyrka - Max: 4 mA
Enhetens vikt: 750 mg
Hittade produkter:
Markera minst en kryssruta för att visa liknande produkter
Markera minst en kryssruta ovan för att visa liknande produkter i denna kategori.
Attribut som valts: 0

Denna funktion kräver att Javascript är aktiverat.

TARIC:
8542399000
CNHTS:
8542399000
USHTS:
8542390090
ECCN:
EAR99

Offline LED Drivers

Diodes Incorporated Offline LED Drivers are designed to deliver highly accurate, constant output current to provide a high level of light quality and avoid flickering. Advanced technologies and architectures ensure high efficiency and reduce EMI. These offline LED drivers require few external components, offer a compact package size, enable lamp designers to reduce PCB footprint, increase power density, and raise overall product reliability. The series keeps start-up and operating currents low and uses dynamic base driver control and valley-mode switching to minimize transition loss and ensure high efficiency. Diodes Incorporated LED Drivers-Controllers feature comprehensive circuit protection, including overvoltage, short-circuit, and overtemperature facilities.

AL1666 LED Driver-Controller

Diodes Incorporated AL1666 LED Driver-Controller is a universal high-current precision, single-stage fly-back, and buck-boost controller. This LED controller features a Primary-Side Regulation (PSR) control method and provides Constant Current (CC) regulation without an optocoupler and secondary control circuitry. The AL1666 LED driver controller operates at Broadcom SoC channel (BCM) mode and provides suitable EMI, efficiency, and high PF with low THD. This controller features an 85VAC to 305VAC wide input voltage range and is available in the SO8 package. The AL1666 LED controller operates at 0V to 2.4V DC signal in analog dimming mode and PWM-to-DC mode with a dimming range from 1% to 100%.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.