ESP32-S2 Wi-Fi® Modules (PCB Antenna)

DFRobot ESP32-S2 Wi-Fi® Modules (PCB Antenna) are generic Wi-Fi MCU modules that feature rich peripherals and high performance. These modules feature an ESP32-S2 chip that is based on the Xtensa® 32-bit LX7 CPU and can operate at up to 240MHz. The ULP co-processor can run while the chip is in sleep mode (CPU powered down). This allows these modules to be used to monitor the state change of peripheral devices or detect if an analog quantity exceeds the preset threshold. The ESP32-S2 modules feature peripheral interfaces including SPI, I2S, UART, I2C, LED, PWM, LCD interface, camera interface, ADC, DAC, touch sensor, temperature sensor, and 43 GPIOs.

Resultat: 3
Välj Bild Artikelnummer
 Tillverk:
Beskrivning Datablad Tillgänglighet Prissättning: (SEK) Filtrera resultaten i tabellen efter enhetspris baserat på din kvantitet.
Antal RoHS ECAD-modell Protokoll stöds
Frekvens
Datahastighet
Gränssnittstyp
Minimal matningsspänning
Maximal matningsspänning
Utgångseffekt
Strömförbrukningsöverföring
Strömförbrukningsmottagning
Minsta drifttemperatur
Maximal drifttemperatur
DFRobot WiFi-moduler - 802.11 ESP32-S2-WROOM Wi-Fi Module (PCB Antenna) 68På lager
Min.: 1
Multipla: 1

802.11 b/g/n 2.412 GHz to 2.484 GHz 150 Mb/s GPIO, I2C, I2S, SPI, UART, USB 3 V 3.6 V 19.5 dBm 160 mA, 200 mA, 220 mA, 310 mA 63 mA, 68 mA - 40 C + 85 C
DFRobot WiFi-moduler - 802.11 ESP32-S2-WROVER Wi-Fi Module (PCB Antenna) 171På lager
Min.: 1
Multipla: 1

802.11 b/g/n 2.412 GHz to 2.484 GHz 150 Mb/s GPIO, I2C, I2S, SPI, UART, USB 3 V 3.6 V 19.5 dBm 160 mA, 200 mA, 220 mA, 310 mA 63 mA, 68 mA - 40 C + 85 C
DFRobot WiFi-moduler - 802.11 ESP32-S2- SOLO Wi-Fi Module (PCB Antenna) Ej på lager
Min.: 1
Multipla: 1

802.11 b/g/n 2.412 GHz to 2.484 GHz 150 Mb/s GPIO, I2C, I2S, SPI, UART, USB 3 V 3.6 V 19.5 dBm 160 mA, 200 mA, 220 mA, 310 mA 63 mA, 68 mA - 40 C + 85 C