DLW32MH101XT2L

Murata Electronics
81-DLW32MH101XT2L
DLW32MH101XT2L

Tillverk:

Beskrivning:
Vanliga drosslar/filter 100 OHM
Simulera och jämför egenskaper i SimSurfing

Datablad:
ECAD-modell:
Ladda ned den kostnadsfria Libary Loader för att omvandla denna fil för ditt ECAD-verktyg. Läs mer om ECAD-modellen.
Mer information
Lär dig mer om Murata Electronics DLW32MH101XT2L

På lager: 6 961

Lager:
6 961
Kan skickas omedelbart
På beställningen:
9 000
Förväntad 2026-06-29
19 500
Förväntad 2026-07-28
Fabrikens ledtid:
13
Veckor Uppskattad tillverkningstid i fabriken för kvantiteter som är större än vad som visas.
Minst: 1   Flera: 1
Enhetspris:
-,-- kr
Ext. pris:
-,-- kr
Est. Pris:
Förpackning:
Komplett Papprulle (beställ i multiplar av 1500)

Prissättning (SEK)

Antal Enhetspris
Ext. pris
Skärtejp/MouseReel™ †
22,79 kr 22,79 kr
18,76 kr 187,60 kr
16,43 kr 410,75 kr
15,37 kr 1 537,00 kr
14,31 kr 3 577,50 kr
13,99 kr 6 995,00 kr
12,19 kr 12 190,00 kr
Komplett Papprulle (beställ i multiplar av 1500)
11,98 kr 17 970,00 kr
† 58,00 kr MouseReel™-avgiften kommer att läggas till och beräknas i din kundvagn. MouseReel™-beställningar kan inte avbeställas eller returneras. ↩

Produktattribut Attributvärde Välj attribut
Murata
Produktkategori: Vanliga drosslar/filter
RoHS-direktivet:  
DLW32_H
PCB Mount
SMD/SMT
1 Channel
100 uH
100 mA
2.6 Ohms
- 40 C
+ 125 C
1210 (3225 metric)
3.2 mm
2.5 mm
2.5 mm
AEC-Q200
Reel
Cut Tape
MouseReel
Wire Wound Chip
Märke: Murata Electronics
Monteringsland: Not Available
Distributionsland: JP
Ursprungsland: JP
Produkttyp: Common Mode Chokes
Fabriksförpackningskvantitet: 1500
Underkategori: Inductors, Chokes & Coils
Handelsnamn: EMIFIL
Enhetens vikt: 64 g
Hittade produkter:
Markera minst en kryssruta för att visa liknande produkter
Markera minst en kryssruta ovan för att visa liknande produkter i denna kategori.
Attribut som valts: 0

Datablad

Models

SimSurfing

TARIC:
8504500000
CNHTS:
8504500000
CAHTS:
8548000000
USHTS:
8548000000
JPHTS:
854800000
ECCN:
EAR99

WE-CMB Common Mode Power Line Inductors (Chokes)

Würth Elektronik WE-CMB Common Mode Power Line Inductors (Chokes) feature a compact design that delivers high suppression of asymmetric interferences, even at low-frequency ranges. In addition, these inductors provide broadband screening due to a low capacitance winding technique. Würth Elektronik WE-CMB Common Mode, Power Line Inductors, are ideal for power electronics and suppressing common-mode noises. Parasitics can have a significant effect on the noise attenuation and current rating of a common mode filter. Würth designed the WE-CMB series for minimal parasitic effects over its useful frequency bandwidth so it does what it is designed to do - get rid of the noise.

EMI Noise Suppression

Noise suppression has become an important issue, especially regarding electromagnetic interference (EMI) and electromagnetic compatibility (EMC). Murata provides engineers with complete support, including products and design-simulation software solutions based on expertise achieved through extensive on-site experience. This enables Murata to provide noise suppression solutions for a broad array of applications.

Automotive Noise / EMI Suppression Filters

Murata Electronics Automotive Noise / EMI Suppression Filters offer components for noise suppression from various approaches, such as small-sized EMI suppression filters and AC line filters that effectively suppress noise. Also among these components are ferrite cores and microwave absorbers, which suppress noise even after the set is completed. Murata offers ESD protection devices that protect semiconductors from static electricity entering from outside.

ADAS Noise Suppression Measures for 1000Base-T1

Today, sensors and cameras are being installed as devices for supporting advanced driver-assistance systems (ADAS). Although LVDS and other interfaces are being used for the transfer of camera data, automotive Ethernet is increasingly being used for the transfer of LiDAR and other sensor data. And while standards such as 100Base-TX and 1000Base-T are being used for office environments, standards such as 100Base-T1 and 1000Base-T1 are specified for use in automobiles.

DLW Common Mode Choke Coils

Murata Electronics DLW Common Mode Choke Coils offer high impedance in the high-frequency band for more effective noise suppression. These choke coils are designed to be low-profile winding type. The DLW series utilizes characteristic impedance matching to enable a sound transmission of high-speed signals. The choke coils are available in general purpose and AEC-Q200 automotive grade. The components offer a wound, low-profile construction in multiple case sizes, and ultra-high self-resonance frequency. Murata DLW Common Mode Choke Coils are ideal for suppressing power line noise on powertrain and safety system Electronic Control Units (ECUs).

Ett oväntat fel har inträffat.


Har du en fråga? Besök hjälpcentret.
Om du har frågor som rör en specifik beställning kan du logga in på ditt konto.

Om du stöter på ytterligare problem kan du kontakta oss på 800-346-6873 eller skicka ett meddelande via e-post till help@mouser.com.