SIT8008AI-31-33E-059.407060X

SiTime
788-8008AI313E59.40X
SIT8008AI-31-33E-059.407060X

Tillverk:

Beskrivning:
MEMS-oscillatorer 59.40706MHz +/-20ppm 3.3V+/-10% -40C+85C

Tillgänglighet

Lager:
Ej på lager
Minst: 1   Flera: 1
Enhetspris:
-,-- kr
Ext. pris:
-,-- kr
Est. Pris:
Förpackning:
Komplett Papprulle (beställ i multiplar av 250)

Prissättning (SEK)

Antal Enhetspris
Ext. pris
Skärtejp/MouseReel™
12,40 kr 12,40 kr
10,71 kr 107,10 kr
9,67 kr 483,50 kr
Komplett Papprulle (beställ i multiplar av 250)
8,13 kr 2 032,50 kr
7,93 kr 7 930,00 kr
7,39 kr 18 475,00 kr
7,01 kr 35 050,00 kr
† 58,00 kr MouseReel™-avgiften kommer att läggas till och beräknas i din kundvagn. MouseReel™-beställningar kan inte avbeställas eller returneras.

Produktattribut Attributvärde Välj attribut
SiTime
Produktkategori: MEMS-oscillatorer
RoHS-direktivet:  
5 mm x 3.2 mm
59.40706 MHz
20 PPM
15 pF
2.97 V
3.63 V
LVCMOS
4.5 mA
- 40 C
+ 85 C
SiT8008
Märke: SiTime
Arbetscykel - max.: 55 %
Höjd: 0.75 mm (0.03 in)
Längd: 5 mm (0.197 in)
Förpackning: Reel
Förpackning: Cut Tape
Förpackning: MouseReel
Produkttyp: MEMS Oscillators
Fabriksförpackningskvantitet: 250
Underkategori: Oscillators
Bredd: 3.2 mm (0.126 in)
Hittade produkter:
Markera minst en kryssruta för att visa liknande produkter
Markera minst en kryssruta ovan för att visa liknande produkter i denna kategori.
Attribut som valts: 0

CNHTS:
8542319090
CAHTS:
8542330000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

SiT8008 Low Power Programmable Oscillators

SiTime SiT8008 and SiT8008B low-power programmable oscillators include a programmable drive strength feature to provide a simple, flexible tool to optimize the clock rise/fall time for specific applications. The programmable drive strength improves system radiated electromagnetic interference (EMI) by slowing down the clock rise/fall time. The programmable drive strength also improves the downstream clock receiver’s (RX) jitter by decreasing (speeding up) the clock rise/fall time. The components have the ability to drive large capacitive loads while maintaining full swing with sharp edge rates. The oscillators exhibit EMI reduction by slowing rise/fall time and jitter reduction with faster rise/fall time. Power supply noise can be a source of jitter for the downstream chipset. One way to reduce this jitter is to speed up the rise/fall time of the input clock. Some chipsets may also require faster rise/fall time in order to reduce their sensitivity to this type of jitter. The components have high output load capability. The rise/fall time of the input clock varies as a function of the actual capacitive load the clock drives. At any given drive strength, the rise/fall time becomes slower as the output load increases. The devices can support up to 60pF or higher in maximum capacitive loads with drive strength settings.