MP5026GLRT-P

Monolithic Power Systems (MPS)
946-MP5026GLRT-P
MP5026GLRT-P

Tillverk:

Beskrivning:
Spänningsstyrenheter med hotswap 16V, 20A, 2.8mohm RDS(ON),Hot-Swap Intelli-Fuse Solution

Livscykel:
Ny produkt:
Nytt från denna tillverkare.
ECAD-modell:
Ladda ned den kostnadsfria Libary Loader för att omvandla denna fil för ditt ECAD-verktyg. Läs mer om ECAD-modellen.

Tillgänglighet

Lager:
Ej på lager
Minst: 1   Flera: 1
Enhetspris:
-,-- kr
Ext. pris:
-,-- kr
Est. Pris:

Prissättning (SEK)

Antal Enhetspris
Ext. pris
25,12 kr 25,12 kr
18,76 kr 187,60 kr
17,28 kr 432,00 kr
15,37 kr 1 537,00 kr
14,63 kr 3 657,50 kr
Komplett Papprulle (beställ i multiplar av 500)
13,99 kr 6 995,00 kr
13,14 kr 13 140,00 kr
12,72 kr 31 800,00 kr
12,51 kr 62 550,00 kr

Produktattribut Attributvärde Välj attribut
Monolithic Power Systems (MPS)
Produktkategori: Spänningsstyrenheter med hotswap
RoHS-direktivet:  
16 V
2.7 V
1 Channel
- 40 C
+ 125 C
SMD/SMT
LGA-26
Reel
Cut Tape
Yes
Märke: Monolithic Power Systems (MPS)
Monteringsland: Not Available
Distributionsland: Not Available
Ursprungsland: Not Available
Utvecklingskit: EV5026-V-00A
Ingångs-/matningsspänning - Max: 16 V
Ingångs-/matningsspänning - Min: 2.7 V
Fuktkänsliga: Yes
Produkttyp: Hot Swap Voltage Controllers
Serie: MP5026
Fabriksförpackningskvantitet: 500
Underkategori: PMIC - Power Management ICs
Hittade produkter:
Markera minst en kryssruta för att visa liknande produkter
Markera minst en kryssruta ovan för att visa liknande produkter i denna kategori.
Attribut som valts: 0

MP5026 Hot-Swap Intelli-Fuse Solutions

Monolithic Power Systems (MPS) MP5026 Hot-Swap Intelli-Fuse Solutions are created to protect circuitry on its output from transients on its input. Furthermore, the device protects its input from undesired shorts and transients from its output. The MP5026 can reach up to 20A of continuous output current (IOUT) per device at room temperature.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.